7. PLACE COvER AND SECURE TO CANOPY FRAME
A. Place cover over assembled roof frame with grommet panels facing down, aligned with cross rails.
B. Make sure the cover is properly aligned on the frame, secure the four corners of the cover with bungees
to the frame first
(10066)
Re-adjust bungees position along cross pole as needed to ensure a tight and even fit of the cover to the frame.
Grommet Panels for Bungees
10066
Grommet
Panel
10044
Attach remaining bungees.
.
Insert Bungee Cord Through Grommet
10045
Page 7
Grommet Panels for Bungees
Grommet Panel
10047
10302
Secure Bungee Around Plastic Ball
05-23572-0B