FTE Maximal MAX T220 HD Manual De Instalación Rápida página 19

reMote control & PAnel descriPtion
1.3 reMote control unit descriPtion
29
1
30
2 3 4
6 7 8
10 11 12 13
14
15
17
19
20 21
22
23 24
26 28
27
1. STANDBY: Switches receiver ON or in stand-by-mode.
2 PREV |<<: Back
3. REV <<: Backward button for recording and TimeShift.
4. FWD >>: Forward button for recording and TimeShift.
5. NEXT >>|: Next
6. PLAY: Start button for recording and TimeShift.
7. PAUSE II: Pause button for recording and TimeShift.
8. STOP: Stop button for recording and TimeShift.
9. RECORD: Quick start for recording.
5
10. USB: Opens the multimedia video menu
11. SUBTITLE: Switches subtitle on and off.
9
12. TTX: Opens and closes teletext.
13. AUDIO: Opens audio menu.
14. EPG: Shows the EPG information.
16
15. Colour Keys: Controls menu options.
16. INFO: Shows channel information with signal bar.
18
17. [
menus.
18. [ ]: Adjusts audio volume or controls the cursor in
menus.
19. OK: Confirms selections or opens channel list.
20. MENU: Opens the main menu.
21. EXIT: Exit menus or stop operations.
22. FAV: Opens favourite channel list.
25
23. VOL+/-: Adjusts audio volume up and down.
24. MUTE: Switches audio on and off.
25. CH+/-: Changes channel up and down.
26. TV/RADIO: Switches between TV and Radio channels.
27. Numeric keys: For direct typing values and names.
28. RECALL: Watch the last viewed channel.
29. TV BUTTONS: The remote control has 4 programmable
buttons for controlling the TV: TV Power, Vol +, Vol-, TV/AV.
Long press the SET button for 3 seconds, the red LED (30) will
be from low light to brighter light,release the SET button.
Place the learning and the original remote control from the TV
opposite to each other at a distance of 3-5 cm.
Press and release the learning remote control button you want to
program,the red LED will light blinking.
Press the button of the original remote control, the LED should
blink 2 times and light constantly, release the button.
When learning is completed, press the SET button, the LED will
turn off.
30. LED. The LED turn on or blinking when press any key in
the RCU.
Remark: The programmable buttons could be not copy the
functionality of the button of the TV remote control, because
could be not compatible.
PAG. 8
]: Changes channels or controls the cursor in