Tank24Sp / Tank20Sp - Description - Montarbo TANK Serie Manual De Instrucciones

Tank24SP / Tank20SP - Description

A Tank24SP: two 12" custom built long-excursion woofers, with
super-vented neodymium magnets (in order to minimize the power
compression effect) and long excursion 2.5" voice-coils.
The carefully designed ported cabinet allows for their uncompressed
low frequency projection.
Tank20SP: two 10" custom built long-excursion woofers, with
super-vented neodymium magnets (in order to minimize the power
compression effect) and long excursion 2.5" voice-coils.
The carefully designed ported cabinet allows for their uncompressed
low frequency projection.
B Tuning port.
Tank24SP / Tank20SP - Connections panel
LINK IN
min 8 Ohm 8 Ohm
2 1
®
The trademark Neutrik Speakon is property of Neutrik
C
A
E
B
F
min 8 Ohm
D
SAT OUT
min 8 Ohm
3
E
LINK IN SAT OUT
8 Ohm min 8 Ohm
C The cabinets, characterized by an essential and rigorous style,
are built from 15mm birch multiply and finished with a special
anti-abrasion paint.
D Steel protection grille.
E
Transport handles.
F
Connection panel.
G Speaker stand adaptor.
Construction and components conform to the highest professional
standards for maximum reliability.
Connections are the same for both models.
1 IN: input connector. It is a Speakon® socket. Connect it to the
power amplifier or to the powered mixer output.
See connection examples on pages 27 and 28.
2 LINK: Speakon® socket for parallel connection of another spea-
ker system. Always pay attention to the total impedance.
See connection examples on pages 27 and 28.
3 SAT OUT: Speakon® socket connected to the passive filter
output. Use it for the connection of a TANK241P/TANK201P used a
passive satellite. See connection examples on pages 27 and 28.
Never connect two power amplifiers to the same
speaker system: doing this may result in serious damage
to the amplifiers.
TOP VIEW
G
D
ENGLISH
9