Function Description; Battery Installation; Care And Maintenance - KIKKA BOO BEAR ON MOON Instrucciones De Uso

Congratulations on your purchase. To ensure maximum protection and optimum comfort for your child, it is essential that you read
through the entire manual carefully and follow all instructions.
WARNINGS
• Do not leave the child unattended.
• Product complies with: EN 71& EN 62115 & REACH REGULATION;
• FOLLOW THE MANUFACTURER'S INSTRUCTIONS.
I. INSTALLATION EXPLAIN
A: Insert the support of the bed bell into the base and x the alignment limit hole.
B: Fasten the projection part into the bracket.
C: Press down the insert at the top of the hanger bracket to expose the bottom, hang the bear hanger, and then push back to in situ
xation.
D: Install the upper bracket into the lower bracket to complete the assembly of the hanger bracket.
E: Fasten the hanger bracket into the projection unit.
F: Install the bed bell in the right place (such as the crib, baby crib, etc.) and adjust the bracket button at last.
Note: The xed position of the bracket should be smooth and rm to avoid accidents.
II. FUNCTION DESCRIPTION
Turn on the power and play the boot sound.
1. Switch key: Press the button to turn on/o .
2. Projection key: Press the button to turn projection on/o .
3. Sleep song key: Sleep song mode: press the key to enter the sleep song mode, then press the key to enter the next song, long press to
open/close the rotation function.
4. Music key: Music mode, press the key to enter the music mode, and then press the key to enter the next song;
5. Volume + Key: Increase the volume; press the key to enter the music mode, and then press the key to enter the next song;
6. Volume - Key: Reduce the volume.
III. BEAR NIGHT LAMP: Switch key (7): press the bear night light to turn on; then press to turn o the night light.
IV. BATTERY INSTALLATION
4.1. Use three 1.5V "AA" non-rechargeable rechargeable batteries for the projection part;
4.2. Use two 1.5V "AAA" non-rechargeable rechargeable batteries for the teddy bear.
V. CARE AND MAINTENANCE
1. Cleaned and wiped by soft cloth, keep toys clean.
2. Avoid direct sunlight and keep away from any heat source.
3. Remove the batteries when the toy is not in use for an extended period of time.
4. Do not collide with a hard object, or attempt to disassemble the toy.
5. Do not drop the toy into water, and avoid moisture
ENGLISH