Montarbo TANK Serie Manual De Instrucciones página 17

Important !
Product care and maintenance
• Never expose the enclosures to direct sunlight, excessive vibrations
or mechanical shocks.
• Never place burning candles or other sources of open flame on top
of the device. Do not expose the enclosures to heat sources (lamps,
lights, high power light sources, radiators or other heat producing
equipment).
• Avoid operating and storing the system in damp or dusty places: this
may lead to malfunctions and premature degradation of performances.
• Avoid using the system close to strong sources of electromagnetic
interference (e.g. video monitors, high power electrical cabling).
This may lead to degradation of audio quality.
• When setting up the system outdoors, be sure to protect it
against rain and moisture.
• Care should be taken to prevent small objects or liquids from falling
or spilling into the enclosure. In public events don't allow musicians,
technicians or anyone else, put glasses, cups, ashtrays or cigarettes
on the enclosures.
• Always leave the protective grid mounted on the enclosures.
• Use a soft brush or a jet of air to clean the enclosure.
Do not use alcohol, solvents or detergents.
• Take care of the connecting cables. Make sure that they are not
damaged, knotted or twisted.
• Do not force connectors and controls.
• As long as it is plugged in, dangerous electrical potentials may be
present inside the device, so, before undertaking any sort of
maintenance work etc., always make sure it has been unplugged
from the mains socket.
active subwoofer
Power supply connection
• Make sure the mains power switch is off ('0') before starting any
connection.
• Check that mains voltage corresponds to the voltage indicated
on the panel.
• Use only the factory supplied mains cable or, if a different plug style
is needed, a suitable cable with a ground connection and marked with
the safety approvals valid in the country of use.
• Leave enough room to get to the mains power socket and the mains
connector on the back panel. As long as it is plugged in, dangerous
electrical potentials may be present inside the device, even when the
mains switch is in the '0' (off) position and the power indicator is off
so, before undertaking any sort of maintenance work etc., always
make sure it has been unplugged from the mains socket..
17
ENGLISH