Screen Configuration; Setting The Day Of The Week And Time; Operation - Mitsubishi Electric Mr.SLIM PL-KAK Serie Manual De Instrucciones

3. Screen Configuration
Function Selection of remote controller
Standard Control Screens
OFF
Timer Monitor
4. Setting the Day of the Week and Time
Day of the Week Setting

5. Operation


<Screen Types>
For details on setting the language for the remote controller display, refer
Set Day/Time
to section 8. Function Selection.
The initial language setting is English.
Function Selection of remote controller:
Set Day/Time:
Standard Control Screens:
Timer Monitor:
ON
Timer Setup:
Timer Setup
<How to change the screen>
A : Hold down both the Mode button and the Timer On/Off button for 2
B : Press the Timer Menu button.
C : Press the Mode (Return) button.
D : Press either of the Set Time buttons (
n Wired Remote-controller
Note:
Day of the Week &
The day and time will not appear if clock use has been disabled at Function
Time display
Selection of remote controller.
1. Press the
2. Press the Timer On/Off (Set Day) button 9 to set the day.
* Each press advances the day shown at 3 : Sun
3. Press the appropriate Set Time button A as necessary to set the time.
* As you hold the button down, the time (at 4) will increment first in
4. After making the appropriate settings at Steps 2 and 3, press the Filter
Time Setting
n Wireless Remote-controller
How to set the current time
1 Press the RESET button using a thin stick.
2 Press the
3 Press the CLOCK button using a thin stick and close the front lid.
Set the functions and ranges available to the remote
controller (timer functions, operating restrictions,
etc.)
Set the current day of the week or time.
View and set the air conditioning system's operating
status
View the currently set timer (weekly timer, simple
timer, or Auto Off timer)
Set the operation of any of the timers (weekly timer,
simple timer, or Auto Off timer).
seconds.
or Set Time button A to show display 2.
Fri Sat.
minute intervals, then in ten-minute intervals, and then in one-hour
intervals.
button 4 to lock in the values.
and button to set the current time.
or ).
Mon ...