Dremel 1100 Instrucciones De Funcionamiento Y Seguridad página 7

BM 2610951850 08-07
Run motor until battery is
!
CAUTION
completely discharged before
attempting to remove battery from your tool.
1. Remove collet nut and collet.
2. Unsnap front nose piece.
3. Remove the three (3) housing screws with a
phillips screwdriver.
4. Remove housing cover by lifting upward at
bottom of handle.
8/15/07 3:50 PM
Battery Removal Instructions
Page 7
5. Disconnect lead wires from battery.
6. Wrap heavy insulating tape around battery
terminals or enclose in a sealable plastic bag
to prevent possible shorting.
7. Dispose of battery through your local waste
removal authority or a Skil/Bosch/Dremel
Service Center.
-7-