Operating Instruction - TECshow BLAZE SCAN RGB Manual De Usuario

Operating Instructions
• Before plugging your unit, be sure the source voltage in
your area matches the required voltage for your lighting
before attempting operation.
• Do not switch unit on and off in short time intervals.
• Always unplug the unit when it is not used for a longer
time or start servicing.
• In the event of serious operating problems, stop using
the fixture and contact your dealer immediately.
• Important: Never look directly into the light source!
Don't use the effect in the presence of persons suffering
from epilepsy.
This fixture is designed to operate as a stand alone sound ac-
tive or auto rotate, there is no need of a controller.
It has been tested and there is no assembly necessary. The
Blaze Scan is ready to be plugged in out of the box, there is
no power switch. When this fixture is plugged in the units
will start to project present designs to the sound of an audio
source via an internal microphone or slow rotating.
BLAZE SCAN
ENGLISH VERSION
p. 8