Charging; To Use - innohaus AFC 49 Manual De Instrucciones

6. Charging

WARNING
Before charging the device's battery, make sure your hands are dry.
1. Ensure the Facial Brush is switched off.
2. Remove the protective USB port cover on the base of the facial brush
and connect the USB Cord to the micro-USB port and to a standard
USB port on a computer or other powered device.
3. While charging, the LED light is flashing. When the device
is fully charged, the LED light will remain on. After charging,
disconnect the USB cable and close the USB port cover.

7. To Use

1. Wet your face and remove all makeup. Apply your selected skin
care product either directly to your face or to the cleansing
bristles.
2. Press the Power Button to begin. Press the +/- Buttons to select
a vibration intensity. Start in the chin area and move the facial
brush along the jaw line toward your ear, then higher on your face
to treat the cheek area. Repeat for the other side of your face.
3. Next, start at the center of your forehead and work outwards on
both sides.
4. Cleanse the nose area by moving the facial brush up and down
along each side. If using the facial brush under the eye area, you
may need to decrease the intensity to avoid damaging the
delicate under-eye skin. Do not apply treatment too close to the
eyes to avoid risk of injury.
8