EUROM MULTICLIMA 70 Manual De Instrucciones página 26

Via remote control:
The remote control provides the same options as
the buttons on the control panel:
POWER = ON/OFF button
FUNC = Function selection
TIMER = Timer
AUTO = Fan speed automatic
HI = Fan speed high
MID = Fan speed medium
LOW = Fan speed low
SLEEP = Sleep function
TEMP. = Temperature regulation
 When you start the Multiclima
and select a certain function or
change the function, the
compressor will not begin to
work immediately; this is to
protect the internal
components. The symbol that
corresponds to the display (see
diagram) will blink to show it is
'waiting'. This can take 3 to 4
minutes.
 The fins for the outlet opening can be adjusted manually to change
the outlet direction.
 If the cooling function is used for a while, internal ice may form in the
Multiclima. You will notice a drop in the unit's effectiveness as a
result. To resolve this situation, switch the unit off and leave for a
while so that the ice can melt. The fan can also be switched on at
the highest setting without cooling.
 Select the function 'cooling' and set the temperature to 30°C if you
would like the Multiclima to ventilate (without cooling or heating).
The compressor will stop working and cooling will cease; the fan,
however, will carry on working.
26