tuctuc MIMI and Go Instrucciones De Uso página 20

1. To open the travel cot:
1.A. Take the travel cot out of its cover (1).
1.B. Firstly, pull the bars of the headboards
upwards at the same time until they are in
position (2).
1.C. Secondly, pull the bars of the sides of the
cot upwards at the same time until they are in
position (3).
1.D. Once the four sides of the cot are fully in
position, push the folding system located at the
base into its lowest position (4).
2. To position the mattress of the cot at double
height:
2.A. Fasten both side zips at double height around
the perimeter of the cot (5).
2.B. To do this, position the crosspieces of the cot.
Take one of the crosspieces and position it inside
the space designed for this purpose at double
height. Do the same with the opposite side and
insert one crosspiece onto the other. To position
the second mattress, repeat this (6).
2.C. Once the crosspieces are in position, attach
the mattress at double height by inserting the four
Velcro straps into each corner of the lower part of
the mattress and fasten them (7).
3. To position the mattress of the cot at lower
height:
3.A. Once the cot is open, place the mattress on
the lower part and fasten the mattress with the 4
Velcro straps designed for this purpose (8).
4. To move the travel cot:
4.A. To transport the cot open, simply lift the cot
at the opposite side to the wheels and move the
cot to the desired place (9).
CAREFUL! DO NOT MOVE THE COT IF THE CHILD
IS INSIDE
20
INSTRUCTIONS FOR USE AND MAINTENANCE
4.B. To transport the cot closed, use the cover
designed for this purpose (10).
5. To close the travel cot at double height :
5.A. Remove the crosspieces of the cot and open
the flap in the centre to access the folding system
in the lower section.
5.B. Pull the folding system of the lower section of
the cot upwards (11).
5.C. Push the central part of the bars of the
headboards down until it folds. Repeat with the
side bars. The cot will then be folded (12).
5.D. Position the crosspieces around the travel cot
and surround the cot with the mattress. Fasten
the mattress into position with the Velcro (13).
6. To close the travel cot without double height:
6.A. Separate the mattress from the cot by
removing the Velcro (14).
6.B. Pull the handle of the folding system in the
lower part of the cot upwards (15). Press the
central part of the bars of the headboards down,
and push downwards at the same time until it
folds. Repeat with the side bars. The cot will then
be folded. Position the crosspieces around the
travel cot and surround the cot with the mattress.
Fasten the mattress into position with the Velcro.
7. Once the travel cot is folded, place it inside the
bag (16).
DANGER. DO NOT USE THE COT UNLESS
ASSEMBLED CORRECTLY
Scan to see an
instructional video.