Taurus VAC 6000 Manual De Instrucciones página 7

ENGLISH
Vacuum sealer
VAC6000
DESCRIPTION
A Lid
B Body
C Side opening buttons
D Bag cutter
E Touch control panel
1 Food type selector (Dry and moist)
2 Progress bar
3 Manual function
4 Sealing function
5 Vacuum and sealing function
6 Cancel
F Bag storage
G Sealing strip
H Vacuum sealing strip
I Heat sealing strip
J Vacuum chamber
K Vacuum hole
L Removable liquid stray
M Cable storage
USE AND CARE:
- Fully unroll the appliance's power cable before
each use.
- Do not use the appliance without the consum-
ables.
- Do not use the appliance if the on/off switch
does not work.
- Do not move the appliance while in use.
- Do not use the appliance if it is tipped up and
do not turn it over.
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
- Use the appliance and its accessories and
tools in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use the appliance
for operations different from those intended
could result in a hazardous situation.
- Do not use the appliance for more than 10
minutes at any one time. Allow to cool for one
hour before subsequent use.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all products' packaging has
been removed.
USE:
- Unroll the cable completely before plugging it
in.
- Take the length of cable required out of the
housing.
- Connect the appliance to the mains.
- The buttons will light up.
HOW TO PRODUCE THE VACUUM USING A
PACKAGING BAG:
- Place the food to be packed inside the bag. Do
not fill the bag to the limit; always leave a space
of at least 7 cm.
- Open the cover of the vacuum packing ma-
chine by pressing the two side buttons.
- Insert the top part of the bag into the vacuum
chamber. To obtain good sealing, the bag must
be free of creases. (Fig. 3)
- Close the cover by pressing the two ends of
the appliance downwards until hear the click
sound.
- Select the type of food to be packed. If the food
contains any type of liquid use the moist food
mode.
- Select the vacuum and sealing function, the
blue LED on the control panel will flash.
- Automatically the filling machine will start the
vacuum function and then the sealing function.
You can see the status of the function in the
progress bar.
- Finally, when the sealing band cools, the blue
LED will stop blinking, indicating that the vac-
uum has finished and the cover of the vacuum
packing machine may be opened by pressing
the two side buttons.
- If you prefer to vacuum manually, press the