SUOMY SR SPORT Manual De Instrucciones página 26

USE and MAINTENANCE
Eng
SIDE AIR INTAKES - OPERATION
The fixed air intakes on the sides allow the extraction of air inside the helmet through the Venturi
effect. Their shape has been designed to optimise this effect and therefore ensure a substantial
extraction of air while maintaining perfect aerodynamic efficiency. The particular shape is also
able to reduce turbulence to a minimum and limit the possibility of the helmet shaking.
REAR AIR VENTS - OPERATION
The innovative rear air intake on the SR SPORT has been designed to further improve ventilation
inside the helmet, using residual air flows that, again thanks to the Venturi effect, are able to
generate a depression in the lower part of the helmet, in this way ensuring a substantial extraction
of the hot air inside it, consequently maintaining a comfortable temperature even at the back of
the head (neck).
PADDING
The inner padding, can be easily removed to be washed or replaced.
Inner central padding: INNER SHELL – Assembly and disassembly
The inner shell (A) is fixed to the helmet through 4 press studs (B).
Removing the mechanism
Snap open the press studs (B) and remove the inner shell (A). Be very careful when removing the
shell, press on the rigid part of the stud and pull slightly towards the inside of the helmet without
damaging the press stud.
Caution: to avoid damaging the inner lining, before removing the inner shell make sure all
the press studs have been snapped open.
24
see figure 5
see figure 5
see figure 6
X
Y
figure 4
figure 5