Nad Electronics 414 Manual Del Usuario página 9

NO SOUND
Power AC lead unplugged or power not switched on.
Signal leads incorrectly connected.
Station not selected or weak signal with FM Mute on.
Internal fuse blown.
NO SOUND ONE CHANNEL
Signal leads to amplifier disconnected or damaged.
NOISE
Hiss. Weak signal.
Distortion. Multi-path signals or interference
from another station.
Whistles or buzzes on FM & AM. Interference from
electrical sources - computers, games consoles.
Whistles or buzzes on AM: Interference from
fluorescent lighting or electrical motors.
NO RDS INFORMATION
Station signal too weak.
Station not transmitting RDS.
TROUBLESHOOTING
Check AC lead.
Check connections to amplifier.
Re-tune or switch off FM Mute.
Consult dealer.
Check leads and connections.
Check signal strength meter. Check station
tuning. Adjust or replace antenna.
Check station tuning. Adjust or replace antenna.
Select 'Narrow' IF Setting.
Check station tuning. Switch off or move the other
source of the electrical noise.
Check station tuning. Adjust or replace
AM antenna.
Check signal strength meter. Check station
tuning. Adjust or replace antenna.
No remedy.
There are 54 characters available including a
blank space.
GB
NAD
9