Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3. Confirm by pressing button
GB
The timer begins counting down immediately. When the
time has elapsed, a buzzer will sound (for 10 seconds).
Control panel lock
When the hob is switched on, the oven controls may be
locked in order to prevent the settings from being changed
accidentally. To activate the function, press and hold button
; for 2 seconds; the controls will be locked and the
indicator light above the button will switch on.
To use any of the controls (e.g. to stop cooking), you must
switch off this function. Press the
moments, the indicator light will switch off and the lock
function will be removed.
BOOST function
The extreme flexibility and versatility of the Multiplo means
it is possible to cook any type of dish quickly, without
compromising its quality.
The "Boost" function in particular speeds up cooking times
for dishes such as pasta or any fried food, reducing the
overall time required by approximately 50% in comparison
with the time required when using a cooking recipient with
a single cooking zone (horizontal position).
Press button
to select the single cooking zone then
press buttons
level "16". The vertical position of the cooking recipient
may be maintained until the cooking process is complete.
Alternatively, once the correct boiling/frying temperature
has been reached and the hotplate switched off using the
relevant buttons, the cooking recipient may be rotated
by 90°, returning it to a horizontal position on the front
cooking zone and keeping the temperature constant (see
figure). The free cooking zone may be used to start another
cooking process by pressing selector button
desired power level by pressing buttons
30
.
button for a few
To bring the water to the boil
or to fry food quickly, simply
switch on the hob, placing the
single cooking recipient centrally
and in a vertical position with
respect to the text "boost"
(see figure).
and
to select the maximum power
Switching off the hob
Press the button
rely solely on the pan sensor.
If the appliance controls have been locked, they will
continue to be locked even after the hob has been switched
back on. In order to switch the hob on again, you must
remove the lock function.
Safety devices
Pan sensor
Each cooking zone is equipped with a cooking recipient
sensor device. The hotplate only emits heat when a
cooking recipient is placed on it. If, once the appliance has
been switched on and the cooking zone and corresponding
power level selected, the numerical indicator flashes, this
means that the cooking recipient should be placed in the
corresponding position.
Heat indicators
If, after the appliance has been used, the letter "H" remains
lit on the corresponding display, this means that the
heating zone is still hot (temperature over 60°C); do not
touch it. This indication will disappear once the hotplate
has cooled down.
Buzzer
This can also indicate several irregularities:
• Something has been spilt on the control panel.
• A button has been pressed for too long. All of the above
situations may cause the buzzer to sound. Remove the
cause of the malfunction to stop the buzzer. The control
panel locks automatically in the above situations. If the
cause of the problem is not removed, the buzzer will
keep sounding and the hob will switch off.
select the
and
.
to switch off the appliance - do not
Publicidad
Tabla de contenido
