Questions And Answers - Kasanova KOE000024NOC Manual De Instrucciones

8
KEEP THE HEATER DRY
ATTENTION: Designed Only For A Wall For Internal Walls.
ATTENTION: Do Not Connect To Extensions Or Taken With Other Appliances.
CAUTION: Risk Of Electric Shock if inserted Strictly into The Socket.

QUESTIONS AND ANSWERS

My Flame Heater does not work
make sure that the socket supports the voltage of 220-240V.
1.
2. make sure that the product or the socket does not show visible damage,
otherwise contact an electrical.
3. make sure you have pressed the ON/OFF button on the side of Flame Heater.
Flame heater only works in a vertical position, make sure you have not inserted
4.
the product into the Flame Heater horizontal position.
Cold/warm air comes out
1. welt a few minutes after a witching on.
make sure you have not set the minimum temperature.
2.
OPERATION
Insert Flame Heater into the 220-240V socket.
1.
Button on the side of the unit towards the ON position to turn the heater on.
2.
Use the "+" button to raise the temperature or "-" to lower it, between 15-32
3.
marked on the display.
Select the desired speed. Press "Speed " to choose HIGH(fast) and LOW(slow)
4.
marked on the display.
5. Press the "ON/OFF" button towards OFF to switch off the heater , and
disconnect it from the mains.
ENG