babymoov A014200 Instrucciones De Uso página 19

Screen displaying the
information from Baby
unit no. 1 ("Out of range"
alert activated)
8. The receiver is equipped with a vibrator function. Set the start/stop switch (11) to the vibrator position; the vibrator
icon appears on the screen
a certain intensity. This function is useful when the parents are in a very noisy environment (e.g.: vacuum-cleaner
noise). To save energy it is recommended not to use the vibrator function too often.
9. If you select "On" on both appliances the "Out of range" alert is set off as soon as the receiver is no longer in range
of the transmitter for more than 30 seconds. The LED sound level indicator (16) as well as the "Out of range" alert
icon start to flash to warn you. The temperature is no longer displayed as well and the symbol
alert stops as soon as the receiver is back within range of the transmitter. If you are using two transmitters the
information concerning the transmitter of which you are out of range stays displayed on the screen throughout
the alert.
N.B. The alert is also set off when the transmitter is off, when the batteries are exhausted, when it has no power
supply, or when the configuration of the alert is not identical on both appliances.
10. As soon as the ambient temperature exceeds the upper or lower temperature limits defined an alarm is set off.
Depending on the limit that has been exceeded the icon
to flash on the receiver screen.
11. It is possible to control the nightlight (6) remotely from the receiver: the start/stop switch (1) needs to be set to
Keep button (15) down while pressing button (12) as many times as is necessary to switch off (OFF); continuously
switch on (ON) the nightlight or set it to VOX mode. The corresponding icons are then displayed on both appliances'
screens. Note the receiver can only control the nightlight of the transmitter of which the number is displayed on
the screen at the moment you press the button (15).
12. The parents have the possibility of being able to answer their child to quieten him. Keep the button (15) down;
the transmission icon
speaking release the button (15). Note that parents can talk to their child whenever they like - even during a
transmission. The receiver transmits your voice to the transmitter of which the number is displayed on the screen
at the moment you press the button (15).
13. The status of the lithium battery is shown by the charge status indicator
the indictor segments go out progressively. Once empty the latter starts flashing and an alarm is set off to remind
you to recharge the battery with the mains adapter.
14. A beep sounds every time you press a button; it means the appliance has taken your action into account.
. The vibrator starts functioning when the sound level of the child's voice reaches
appears on the receiver screen. Talk in the microphone (17). Once you have finished
BABYPHONE DIGITAL GREEN • Instruction Manual
Screen displaying the
information from Baby
unit no. 2 ("Out of range"
alert inactivated and
nightlight set to VOX)
(max) or (min) as well as the temperature start
. As the battery charge goes down
appears. The
.
19