Technical Specifications - Slendertone Baxolve Instrucciones De Uso

T S
ECHNICAL PECIFICATIONS
Repair, Service & Modification
Access to the interior is not required for maintenance
purposes.
Repair, service and modifications may not be
carried out by anyone other than qualified service
personnel authorised by Bio-Medical Research Ltd.
If your unit is damaged, you should not use it but
s h o u l d return it to Bio-Medical Research Ltd.
Bio-Medical Research Ltd. will not accept any
responsibility where the guidelines and instructions
are not followed.
Used adhesive pads and batteries must never be
disposed of in a fire but in accordance with your
country's national laws governing the disposal of
such items.
It is advisable to use a leak proof battery to help
p re vent corrosion. We suggest using alkaline
batteries. Never leave a battery in the unit if it is not
intended to be used for a long period of time. If you
do, the battery may leak causing damage to the unit.
You should be aware that some batteries sold as
' l e a k - p ro o f' can still release corro s i ve substances,
which may damage the unit. Under no circumstances
should anything other than the correct type of
battery be used.
Accessories
Accessories can be purchased from your nearest
stockist, from the website
SLENDERTONE SLENDERTONE
or, by calling your local Careline:
SLENDERTONE
• Belt Pads: Type: 612
BAXOLVE
• Pads (for leads): Type: 601
BAXOLVE
• Belt Extension
BAXOLVE
Only adhesive pads specified by Bio-Medical
Research Ltd. for use with the product may
BAXOLVE
be used. Using other adhesive pads may degrade
performance levels.
Product Ty p e: 294
Intended use: Transcutaneous Electrical
Nerve Stimulator
E n v i ronmental Sp e c i f i c a t i o n s :
Operating Range: Temperature 0 to 35˚C
Humidity: 20 to 65 % RH
Storage Range: Temperature 0 to 55˚C
Humidity: 10 to 90 % RH
Description of your unit's symbols:
There are a number of technical markings on your
unit. These can be explained as follows:
Manufactured for Bio-Medical Research Ltd.,
Parkmore Business Park West, Galway, Ireland.
14
Rated Outputs Voltage/Current:
Parameter 500 1k 2k
Output RMSV 6.25V 12.6V 14.8V
Output RMSA 12.5mA 12.62mA 7.4mA
Output Frequency 4-99Hz 4-99Hz 4-99Hz
DC Component 0C 0C 0C
Pulse-Width 120-150µs 120-150µs 120-150µs
Current Intensity
0-62.8mA 0-62.8mA 0-62.8mA
Range (per pulse)
Inside the battery compartment '+' indicates positive
polarity and '-' indicates negative polarity. DC (Dire c t
C u r rent) is indicated by the symbol:
The Output Frequency indicates the number of pulses
per second transmitted by the unit. This is measured
in hertz, which is indicated by "Hz".
Output (RMSA): means the max. output root means
s q u a re current for each channel, measured into a
500 load.
Output (RMSV): means the max. output root means
s q u a re vo l tage for each channel, measured into a
500 load.
This symbol means "Attention, consult the
!
accompanying documents".
This symbol means type BF equipment.
SN stands for "serial number".
Inside the box, on the back of the unit is the serial
number specific to this unit. The letter preceding the
number indicates the year of manufacture, where 'A'
denotes 1995, 'G' denotes 2001, 'H' denotes 2002 etc.
The batch number of the belt is represented on the
packaging, by the number corresponding with the
LOT symbol.
Material Fabrics:
Outer material: Nylon laminated to Polychloroprene,
Nylon laminated to foam, Nylon mesh laminated to
foam.
Binding: 82% Nylon, 18% Elastane.
Hook & Loop: 100% Nylon.
Foam: 100% Polyurethane.
Elastic Straps: 50% Polyproplene, 30% Polyester,
20% Elastane.
This symbol on your is to indicate
BAXOLVE
conformity to the requirements of the
Medical Device Directive (93 / 42 / EEC).
0366
0366 is the number of the notified body
(VDE).
E n g l i s h
T S
ECHNICAL PECIFICATIONS
At the end of the product lifecycle, do not
throw this product into the normal household
garbage, but bring it to a collection point for
the recycling of electronic equipment.
Some product materials can be re-used if you
bring them to a recycling point. By re-using
some parts or raw materials from used
products you make an important contribution
to the protection of the environment. Please
contact your local authorities if you need more
information about collection points in your
area.
Waste Electrical and Electronic Equipment can
have potentially harmful effects on the
environment. Incorrect disposal can cause
harmful toxins to build up in the air, water and
soil and can be harmful to human health.
15