biohort LED-Lamp Instrucciones De Funcionamiento página 6

GB Original operating instructions
Biohort LED-Lamp
Danger! - Read the operating instructions to reduce the risk of inquiry
Caution! Do not look into the light beam.
Danger!
When using the equipment, a few safety precautions must be observed to avoid injuries and damage.
Please read the complete operating instructions and safety regulations with due care. Keep this
manual in a safe place, so that the information is available at all times. If you give the equipment to
any other person, hand over these operating instructions and safety regulations as well. We cannot
accept any liability for damage or accidents which arise due to a failure to follow these instructions
and the safety instructions.
1. Safety regulations
Danger!
Read all safety regulations and instructions. Any errors made in following the safety regulations and
instructions may result in an electric shock, fire and/or serious injury. Keep all safety regulations and
instructions in a safe place for future use.
2. Layout, install and items supplied
Layout
The sensor range is 2-3meters in the front, an 1-2meters at the sides. The sensor effect is related tot
he temperature and movement speed. Sensor should not be covered or dirty, it should be cleaned. It
must be keept away from dampness, too high or too low temperature and air vent.
The lamp should be fully charged for optimal operations.
The lamp may only be used indoors!
6