Attaching The Viewfinder - Sony DXF-20W Manual De Instrucciones

2
Attach the supplied viewfinder shoe.
Align the holes in the backside of the
viewfinder shoe with the two pins on
the VF shoe fixing bracket. At this
point, the triangular mark on the
viewfinder shoe should be facing
upward.
Pins
3
With the spring washers and bolts
removed in step 1, fasten the
viewfinder shoe to the VF shoe fixing
bracket.
18 Attaching the Viewfinder to a Camcorder
VF shoe fixing
bracket
Viewfinder shoe
Holes to align with
the pins (backside
of the viewfinder
shoe)
Triangular mark

Attaching the Viewfinder

1
1 Loosen the left-right positioning
ring of the camcorder.
2 Engage the slide rail on the
viewfinder backside with the
viewfinder shoe.
Stopper
Slide rail
2
1
2
1 Slide the viewfinder in the
direction shown by the arrow to the
required mounting position.
2 Tighten the left-right positioning
ring of the camcorder.
3 Plug the viewfinder connector into
the VF connector of the camcorder,
and clip the cable into the cable clamp .
View finder
shoe
Left-light
positioning
ring