Orbegozo WF 0245 Manual De Instrucciones página 11

WF 0245
ASSEMBLE AND USE
- Place the rear guard (6) on the front cover of the motor (8) through the motor shaft (7) and use the
guard nut (4) to fasten the rear guard.
- Put the blade (3) through the motor shaft and then use the blade nut (3) to fasten the blade
securely.
- Place the front guard (1) in front of the rear guard, then secure the two guards via the ring (5).
INSTRUCTIONS FOR WALL MOUNTING
1. Drill 3 holes in the wall using the holes on the wall bracket (Fig1-2) as a guide.
2. Press the 3 plastic inserts provided into the holes.
3. Mount the wall bracket (2) on the wall with three screws (Fig1-1) provided (see Fig 2).
Note: Four screws are provided. Three screws are used to fix the wall bracket to the wall, the last screw is
used to fix the wall fan in place after mounting.
4. Hang the motor and control bow with the mounting hole onto the wall bracket
OPERATION WITH REMOTE CONTROLLER
The remote control requires 2×AAA batteries.
1. Press the button ON SPEED to select the speed: Low/ Medium/ High.
2. Press the button MODE to choose the wind speed: Sleep/ Natural/ Normal.
3. Press the button TIMER to set the time: 0.5h-7.5h
4. Press the button LAMP to turn on/turn off the light.
5. Press the button SWING to turn on/turn off the swing function.
11