Operating Instructions; Applying Power - RIP TUNES CDB-232BT Manual De Usuario

OPERATING INSTRUCTIONS

GETTING STARTED AND BLUETOOTH® PAIRING

Applying Power

Your Bluetooth CD Boombox can run on AC power or on 8 C batter-
ies (not included).
To run on AC power, plug the AC power cord into the AC Input
connector (22) on the rear of the boombox. Plug the other end into
a grounded wall outlet.
To run on battery power:
1. Open the Battery door (23) by gently pushing the tabs on the
compartment door in the direction indicated on the bottom of
the boombox.
2. Insert 8 C size batteries (not included) into the battery compatr-
ment. Follow the diagram in the battery compartment to insert
the batteries correctly.
3. Slide the Battery door back into place.
Pairing to a Bluetooth Device
1. Turn the boombox on.
2. Set the function switch to the CD/BT position.
3. Push the CD/BT button to BT mode.
4. When the Boombox digital display indicates "No", press the
CD/BT button once. The blue BT indicator light will turn on.
5. Turn the external Bluetooth device on and enter Bluetooth
search mode.
6. Your external Bluetooth device displays CDB-232BT when it
detects the boombox. Select CDB-232BT to begin pairing.
7. When the external Bluetooth device and boombox are paired, a
tone will sound in the speaker again and the blue BT indicator
will stop blinking.
Note: If pairing fails, delete CDB-232BT from the available Bluetooth
devices list on your external device and try pairing the two again
using the instructions above.
7