Using The Tare Function (Tare) - Xavax Stella Instrucciones De Uso

5.3 Weighing
• Place the scales on a clean, level table. Make sure that
the scales are stable and do not tilt.
• Switch on the scales by pressing the ON/TARE button.
After switching on the scales, all symbols appear on the
display. Wait until "0 " appears on the display. You can
then place the item to be weighed onto the scales and
read the weight value.

5.4 Using the tare function (TARE)

• Place the empty container onto the scales; the weight
is shown on the display. Set the scales to zero (tare) by
pressing the ON/TARE button. Now place the new item
to be weighed (in the container) onto the scales. Only
the net weight of the item (its weight without the weight
of the container) is shown.
Once the display stops changing, the scales automatically
switch off after approximately 120 seconds. You can
manually switch off the scales by pressing and holding
down the ON/TARE button for approx. 3
6. Error messages
• When the error message 'Err' is shown, the scale is
overloaded.
• When the error message 'LO' is shown, the battery is
empty. Replace the battery as soon as possible.
7. Care and Maintenance
• Only clean this product with a slightly damp, lint-free
cloth and do not use aggressive cleaning agents. Make
sure that water does not get into the scales.
• The weighing surface is made of stainless steel.
8. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no
warranty for damage resulting from improper installation/
mounting, improper use of the product or from failure to
observe the operating instructions and/or safety notes.
9. Service and Support
Please contact Hama Product Consulting if you have any
questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.xavax.eu
10. Technical Data
11. Recycling Information
Note on environmental protection:
disposed of with household waste. Consumers are obliged
seconds.
by law to return electrical and electronic devices as well as
batteries at the end of their service lives to the public
collecting points set up for this purpose or point of sale.
Details to this are de ned by the national law of the
respective country. This symbol on the product, the
instruction manual or the package indicates that a product
is subject to these regulations. By recycling, reusing the
materials or other forms of utilising old devices/Batteries,
you are making an important contribution to protecting our
environment.
Max. weight
Scale division
Units of
measurement
Low battery and overload warning
Power supply 3x AAA / Micro (3x 1,5 V)
After the implementation of the European Directive
2012/19/EU and 2006/66/EU in the national legal
system, the following applies: Electric and
electronic devices as well as batteries must not be
5000 g
1 g
g, ml, lb:oz, 'oz
3