Programming - Vimar RADIOCLIMA 01910 Manual De Instrucciones

8 PROGRAMMING.

• Set the temperature levels T1-T2-T3.
• Press the buttons
ming menu.
• Use the buttons
(we recommend starting on Monday).
• Use the buttons
• Set the desired temperature level by using the button
between Antifreeze and Temperature levels T1-T2-T3.
1. When you have finished setting the day, press the button
confirm.
Pressing the button twice returns to normal operating mode.
2. If you wish to continue programming other days, press the button
instead of the button
The chronothermostat saves the set data, the menu displays the
next day and the message "Copy" appears.
To copy the program of the previous day, press the button
otherwise move to the desired time using the buttons
or to enter the program-
to select the day to be programmed
to select the time to be modified.
to choose
.
and edit the program as you prefer.
Repeat point 1. and point 2. to program all of the days of the
week.
If you wish to set the activation time of the temperature level at 15
minutes, 30 minutes or 45 minutes, press the button
quence.
Example.
If you want the program to change from level T1 to level T2 at 6:30,
set level T2 at 6:00, press the button
to
,
in se-
, then continue normally.
ENGLISH - 25