Product Components - Hoover H-Free 200 Manual De Instrucciones

Do not use the appliance to clean animals or people.
Do not replace the batteries with non-rechargeable batteries.
The Environment:
This appliance is marked according to the European directive 2011/65/EC on Waste Electrical and Electronic
Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. The symbol on the product indicates that this product may not be treated
as household waste. Instead it shall be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. Disposal must be carried out in accordance with local environmental
regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this product,
please contact your local city office, your household waste disposal service or the shop where you purchased the product.
This product complies with the European Directives 2014/35/EU, 2014/30/EU and 2011/65/EU.
CANDY HOOVER GROUP S.r.l. Via Privata Eden Fumagalli, 20861 Brugherio (MB) Italy

PRODUCT COMPONENTS

A. Wall Mount*
B. Wall Mount Screws*
C. Main Body
D. Turbo Button
E. Main Body Release Button
F. Tube
G. Nozzle Release Button
H. Nozzle
I. Agitator Release Flap
J. Nozzle Front LED
K. Brush Bar Status
L.
La. Intense Floor Roller
Lb. Deep Care Roller
Lc. Rear Soft Strip
M. Wiper Blade
N. Dust Cup
O. Dust Cup Empty Button
P. Mesh Filter
Q. Single Cyclone Separator
PREPARING YOUR CLEANER
1. On first use, fully charge the appliance battery by connecting the charger jack plug to the battery pack. Charging time
is approximately 5Hrs. The battery pack LED light will illuminate Red during charging and will turn WHITE when fully
charged. [1]
2. Assemble the tube to the nozzle until you hear it "click" into place. [2a]
3. Assemble the main body unit to the tube until you hear it "click" into place. [2b]
NOTE: To remove the nozzle press the nozzle release button and pull away from the main body.
NOTE: Use only the charger supplied with your cleaner to recharge.
IMPORTANT: When charging the cleaner the switch lever must be in the OFF position. You can charge the removable
battery pack also when released from the product.
It is normal for the charger to become warm to touch when charging.
* Certain Models Only
R. Single Cyclone
S. Battery Pack
Sa. Battery Pack Release Buttons
Sb. Battery Pack Charging Inlet
Sc. Battery Pack Charging/Discharging Led Light
T. Battery Pack Charger
U.
Ua. On/Off Switch
Ub. Continuous Mode Lever
V. Exhaust Filter Release Buttons
W. Exhaust Filter
X. 2 In1 Large Dusting And Furniture Tool*
Y. 2 In1 Crevice And Dusting Tool*
Z. Mini-Turbo Nozzle*
AA. Accessory Adaptor*
AB. Radiator Tool*
AC. Deep Cleaning Brush*
AD. Multi-Function Up To Top Tool*
AE. Long Flexible Crevice Tool*
5
GB