Safety Instructions - MSW STYRO CUTTER 01 Manual De Instrucciones

User manual
Product name: Hot Knife Foam Cutter
Model: STYRO CUTTER 01 | STYRO CUTTER 02 | STYRO CUTTER 03 | STYRO CUTTER 04
Manufacturer name: emaks spółka z ograniczoną odpowiedzialnością sp.k.
Manufacturer address: ul. Dekoracyjna 3, 65-155 Zielona Góra
M S W M O T O R T E C H N I C S
SYMBOLS
The operation manual must be carefully read.
Never dispose of electrical equipment together with household waste.
This machine is conforming to the CE declarations.
Attention! Wear protective gloves.
Safety goggles must be worn.
Protective footwear must be worn.
Attention! Hot surface may cause burns.
Attention! Risk of fire or explosion.
Attention! Harmful fumes, danger of poisoning.
PLEASE Drawings in this manual are for illustration purposes only and in some details
NOTE may differ from the actual product.
The original operation manual is in German. Other language versions are translations from German.
I. SAFETY INSTRUCTIONS
1. Before using the tool, the manual must be carefully read. Please observe the safety guidelines cautiously.
2. The tool must be operated in accordance with the purpose specified in the manual.
3. The tool can be operated only by employees after training has been completed successfully, including
health training and safety and fire protection guidelines.
4. Employees who will be handling the tool should wear protective clothing and should be provided with
personal protective equipment as indicated in the instructions.
5. The tool must be immediately switched off in case of damage or malfunction. Such situations must be
reported to the entitled person.
6. Please contact the manufacturer's service in case of any doubts regarding proper work of the tool.
7. The tool can be repaired only by the manufacturer's service. Do not make repairs by yourself!
8. In case of fire, use only dry powder extinguishers or snow extinguishers (CO2) to extinguish the
energized product/machine/tool.
9. ATTENTION! Components get hot during the operation - ensure proper ventilation in the operating
room and wear protective gloves.
10. Keep the work area clean. Cluttered areas can cause injuries.
11. Consider the environment of the work area. Don't expose power tools to rain or wet soil. Don't
use power tools in damp or wet locations. Work area should be well protected. Don't use tool in
the presence of flammable liquids or gases. Power tools produce sparks during normal operation or
when switching ON/OFF. Never use power tools in dangerous sites containing lacquer, paint, benzene,
thinner, gasoline, gases, adhesive agents, and other materials which are combustible or explosive.
12. Provide sufficient protection against electric shock. Prevent body contact with grounded surfaces. For
example: pipes, radiators, ranges, refrigerator enclosures.
13. Keep children and third parties away from the work area.
14. When not in use, tools should be stored in dry, locked-up places and out of reach for children.
15. Safety goggles must be worn.
16. Do not damage the connection cable. Never carry the machine by the cable. Do not pull the cable in
order to disconnect it from the plug. Keep the cable from heat and oil sources and sharp edges.
17. Secure the work area. It is recommended to use clamps or a vice for fixation. Please pay special
attention to your hands when operating the machine.
18. Do not overreach yourself. Keep proper posture and balance at all times.
19. Hold the machine firmly in both hands. When using the machine, hold it by the handle.
20. Please take care of the tools. Keep the tools clean for better and safer performance. Follow the
instructions to change the accessories. Inspect the extension cords periodically and replace them if
they are damaged. Keep the handles dry, clean, and free from oil and grease.
Rev. 13.10.2016
9