Temperature Selection - Beko WTV 8633 XS Manual Del Usuario

• Camisas (Shirts)
Use to wash the shirts made of cotton, synthetic and synthetic blended fabrics together.
• Aqua 40' 40°
Use this programme to wash your lightly soiled and unstained cotton laundry in a short time.
• Higiene 20° (Hygiene 20°)
Use this programme to remove the odour on the laundry that are worn only for once and do not contain any
stains or dirt.
• Enjuague (Rinse)
Use when you want to rinse or starch separately.
• Centrifugado y vaciado (Spin + Drain)
Use to drain the water in the machine.

4.3.4 Temperature selection

Whenever a new programme is selected, the recommended temperature for the selected programme appears
on the temperature indicator.
To decrease the temperature, press the Temperature Adjustment button. Temperature will decrease gradually.
C
If the programme has not reached the heating step, you can change the temperature without switching the machine to
Pause mode.
4.3.5 Spin speed selection
Whenever a new programme is selected, the recommended spin speed of the selected programme is
displayed on the spin speed indicator.
To decrease the spin speed, press the Spin Speed Adjustment button. Spin speed decreases gradually.
Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display. See
"Auxiliary function selection" section for explanations of these options.
Rinse Hold
If you are not going to unload your clothes immediately after the programme completes, you can use rinse
hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled
when there is no water in the machine. Press Start / Pause button after this process if you want to drain the
water without spinning your laundry. Programme will resume and complete after draining the water.
If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button.
The programme resumes. Water is drained, laundry is spun and the programme is completed.
C
If the programme has not reached the spinning step, you can change the speed without switching the machine to Pause
mode.
Indicative values for Synthetics programmes (EN)
Synthetics 60
Synthetics 40
* You can see the washing time of the programme you have selected on the display of the machine. It is normal that
small differences may occur between the time shown on the display and the real washing time.
** Remaining moisture content values may differ according to the selected spin speed.
16 / EN
3 64 1.10
3 64 0.61
Remaining Moisture
Content (%) **
≤ 1000 rpm
105/135 45
105/135 45
Remaining Moisture
Content (%) **
> 1000 rpm
40
40
Washing Machine / User's Manual