Descargar Imprimir esta página

Care & Cleaning; Removable Filter - Breville bke845 Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

Care & Cleaning
Always unplug the appliance from the power
outlet before cleaning.

REMOVABLE FILTER

The Breville Smart Kettle™ Luxe features a
removable mesh filter to remove scale deposits
for cleaner water. To clean the scale deposits
from the filter, remove the filter by opening the
lid and sliding the filter up and out of the kettle.
The filter can be cleaned by placing under
running hot water and rubbing with a cleaning
cloth or brush. To replace the filter, simply slide
the filter down into the slot behind the spout of
the kettle and push back into position.
NOTE
The filter could become damaged with time,
so please check regularly and replace if
found damaged.
DESCALING
It is essential that regular descaling takes
place. Frequency will depend on the usage
of the kettle and the hardness of the water in
your area. A build-up of scale may cause the
inside of the kettle to discolour and ultimately
may damage the element. This will affect the
efficiency of the appliance and may invalidate
the warranty agreement. We recommend the
use of Breville Kettle Cleaner as it's specially
formulated for descaling kettles. To order,
contact Breville Consumer Support.
Follow the instructions for use on the Kettle
Cleaner packaging for best results.
12
Directions for use:
1. Fill the kettle two-thirds full with 1 part
vinegar and 2 parts water. Boil and allow to
stand overnight.
2. Empty the solution from the kettle. Fill the
kettle with clean water, bring to the boil and
discard the water. Repeat and the kettle will
be ready for use.
TO CLEAN THE EXTERIOR
The outside of the kettle should be wiped
with a damp cloth then polished with a soft,
dry cloth.
NOTE
Do not use chemicals, steel wool, or abrasive
cleaners to clean the inside or outside of
the kettle.
STORAGE
Ensure the kettle is unplugged, clean and dry
before storing. Ensure that the lid is closed and
locked securely into place. Wrap the power
cord around the power cord storage under the
power base. Stand the kettle upright on the
power base. Do not store anything on top.

Publicidad

loading