Electrical Connection - Hella Jumbo 320 FF Instrucciones De Montaje

Page 4:

Electrical connection

Install relay with connection
terminals pointing downwards so
that they are protected against
splashing water.
If required, and legally permissib-
le, install switch in dashboard.
11
One more tip:
Keep the lenses clean. Dirt can
absorb up to 80% of the light.
You drive more safely when
you can see and be seen well.
Do you have spare bulbs and
fuses in your vehicle?
Lay and connect wires according
to circuit diagram.
According to circuit diagram
the auxiliary lamps are switched
on together with the existing
main beams.
According to circuit diagram
the auxiliary lamps can be swit-
Have the driving lamps adjusted
at a workshop or service
station. Only properly adjusted
lamps provide optimum illumi-
nation.
Check that the lighting system
is working perfectly!
If you have questions or instal-
lation problems, please call the
HELLA Service, wholesaler, or
turn to your garage.
ched on in addition to the main
beams with a separate switch.
I
According to circuit diagram
the position lamps are wired up
and switched on together with
the parking light.
II Check lights, tighten connection
wires securely.
The use of the enclosed pro-
tective caps (enclosed where
applicable) is not permissible
in areas governed by German
Traffic Laws.
III