Principle Of Operation; General Information - Italiana Camini POLIS Instalación Uso Y Mantenimiento

GENERAL INFORMATION

PRINCIPLE OF OPERATION

The stove produces hot air using wood pellets as fuel, with
electronically controlled combustion.
Hereunder is the explanation of its functions (the letters refer to
A
fi gure 1).
B
The fuel (pellets) is taken from the hopper (A) and, using a
screw (B) operated by a gear motor (C), is sent to the crucible
D
(D).
E
The pellets are lit by hot air produced by an electrical element
C
(E) sucked into the crucible through a smoke extractor fan (F).
The smoke produced by combustion is extracted from the
combustion chamber by the same fan (F) and expelled from the
vent (G) located in the lower rear of the stove..
G
With POLIS stove is possible to blow hot air only in the room
where it is placed.
F
For ducting hot air in other rooms too, it is necessary to add
the following optional kit (see details on page 37)
- KIT TO TRANSFORM THE STOVE POLIS FROM STOVE g. 1
POLIS TO DUCTED consisting of fan, Ø10 pipe and accesso-
ries.
- DUCTING KIT No. 11 for distributing hot air also to an
adjacent room
- DUCTING KIT No. 11B for distributing hot air also to a
remote room.
POLIS PLUS stove is already equipped by a fan for generating
hot air to duct and it is possible to add the DUCTING KIT n.11
and 11 BIS as option (see details on page 37).
The combustion chamber, lined with steel/cast iron, is closed at
the front by a ceramic glass door.
The quantity of fuel, the extraction of the smoke and the input
of air for combustion are regulated by a motherboard equipped
with software, to obtain a high combustion yield and low emis-
sions.
The main phases can be managed by display or remote control
supplied as optional.
The stove has a serial socket for optional wire connection (code
640560) to remote controlled ignition devices (chrono-thermo-
stats etc.).
The ceramic covering is available in four colors:
burgundy, leather, parchment and Brown wengé.
- 29
-