Troubleshooting&Transport; Troubleshooting; Transport - ROMMER H-610 Manual De Usuario

6. TROUBLESHOOTING&TRANSPORT

6.1 troubleShootinG

If you still have a problem with your appliance after checking these basic
troubleshooting steps, please contact an authorised service person or qualified
technician.
Problem
Oven does not switch
on.
No heat or oven does
not warm up.
Oven light (if available)
does not operate.
Cooking is uneven
within the oven.
The timer buttons
cannot be pressed
properly.
The oven fan (if
available) is noisy.

6.2 tranSport

If you need to transport the product, use the original product packaging and carry it using
its original case. Follow the transport signs on the packaging. Tape all independent parts to
the product to prevent damaging the product during transport.
If you do not have the original packaging, prepare a carriage box so that the appliance,
especially the external surfaces of the product, is protected against external threats.
Possible Cause
Power is switched off.
Oven temperature control is incorrectly
set.
Oven door has been left open.
Lamp has failed.
Electrical supply is disconnected or
switched off.
Oven shelves are incorrectly
positioned.
There is foreign matter caught
between the timer buttons.
Touch model: there is moisture on the
control panel.
The key lock function is set.
Oven shelves are vibrating.
Check whether there is power supplied.
Also check that other kitchen appliances are
Check that the oven temperature control
Replace lamp according to the instructions.
Make sure the electrical supply is switched
Check that the recommended temperatures
and shelf positions are being used.
Do not frequently open the door unless you
are cooking things that need to be turned.
If you open the door often, the interior
temperature will be lower and this may affect
Remove the foreign matter and try again.
Remove the moisture and try again.
Check whether the key lock function is set.
Check that the shelves and any bake ware
are not vibrating or in contact with the oven
EN - 22
Solution
working.
knob is set correctly.
on at the wall socket outlet.
the results of your cooking.
Check that the oven is level.
back panel.