Safety System - EINHELL HT 2020 F Manual De Instrucciones

Anleitung HT 2020-12spr.
Motor:
Voltage 230V ~ 50Hz
Extension up to 25 m
Extension up to 50 m
Voltage Volt 100-115
Extension up to 25 m
Extension up to 50 m
Use the high-pressure cleaner near the water
supply in question.
The packing materials can be recycled and must
therefore be disposed of in compliance with the
prevailing regulations.
The high-pressure cleaner may be operated only
with the manufacturer's original accessories and
spare parts. The use of original parts is at the
same time a guarantee for the safe and fault-free
operation of the high-pressure cleaner.
The high-pressure cleaner may be operated only
in a horizontal position.
3a
Applications
The high-pressure cleaner is intended
exclusively for the cleaning of vehicles,
machines, boats, buildings etc. from which it
removes stubborn dirt using a jet of clean water
and chemical detergents.
Use only chemical detergents which have been
proven to be biodegradable.
Vehicles may be cleaned only on premises
equipped with the necessary oil separation
system.
06.11.2001 14:00 Uhr
2
cross section 3 x 1.5 mm
2
cross section 3 x 2.5 mm
2
cross section 3 x 2.5 mm
2
cross section 3 x 4 mm
Seite 11

Safety system

The safety valve also functions as a pressure limiting
device. When the pistol is closed, the valve opens
and allows the delivered water to circulate in the
pump.
4. Installation
Connect the lance to the pistol. To do this, insert
the lance in the pistol and turn it clockwise as far
as it will go.
Important!
Make sure the lance is securely attached to the
pistol.
4a
Connect the pistol to the high-pressure hose.
4b
Connect the high-pressure hose to the water
outlet of the high-pressure cleaner.
4c
GB
11