Safety And Installation Notes - Wisi VS 35 PRO Instrucciones De Manejo

Safety and installation notes – please observe
Caution
The mains voltage must match the rated input voltage of the unit
Connecting cable
Lay the cable so that no one can trip over it
Lay the cable with a downward loop so that any condensing on it can drip on the floor
instead of running into it
Selecting the installation location
Excessive temperatures will reduce the operating lifetime of the unit
GB
Do not install the unit directly above or in the vicinity of radiators
or heating systems where it would be subjected to thermal radiation or oil vapours
Moisture
Water dripping or splashing onto the unit will damage it. If there is condensation
on the unit, wait until this has evaporated before switching the unit on
Caution – danger!
In accordance with EN 50 083-1, the antenna system must comply with the safety requirements
with respect to grounding, potential equalization, etc...
Service work
Service work may be carried out only by qualified personnel
Always disconnect the supply voltage before starting any such work
Cleaning
Only use a dry soft cloth to clean the cabinet
Do not use solvent
- 5 -