Orbis ANRET M-MULTI Manual De Uso página 38

Zeroing the active energy meter
L1
k
M
V
L2
A Sys
W
L3
PF
Wh OK
k M
varh Prg
Press the " " or "
W
To confirm the value set and go to the next window, press the "
Zeroing the reactive energy meter
Proceed as with the zeroing of the active energy meter
When the " " key is pressed, all the symbols on the display will come on for
Wh OK
approximagely 3 seconds, after which the main page will be displayed
Note: if the power supply is cut off during programming, the instrument
will memorise all the settings entered up to the time when it is
switched off.
DISPLAYING THE MEASUREMENT PAGES
When the instrument is switched on (or after programming), the voltage page will
be shown after the display has been switched on for approximately 3 seconds
The main values (voltage, current, active power ratings, power factor and
total active and reactive energy) are displayed when the corresponding key
is pressed
Values V, A, W and PF are those for the three phases and the system, each of
which is displayed in three digits
For Wh and varh, only the system value is displayed, in seven digits
The type of value displayed is indicated by a warning lamp alongside the label
L1
L2
L3
k M
Wh OK
" keys to select the "YES" or "NO" options
PF
- 36 -
User's Manual - ANRET M-MULTI / Q-MULTI
k
M
V
A Sys
W
PF
Wh OK
k
varh Prg OK
Wh
Wh OK
L1
k
M
V
L2
A S
W
L3
PF
Wh O
M
varh P
" key