Proper Use; Safety Information; Technical Data - EINHELL BG-CG 7,2 WT Manual De Instrucciones

Anleitung_BG_CG_7_2_WT_SPK7:_
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.

1. Safety information

Please refer to the booklet included in delivery for the
safety instructions.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
Explanation of the warning signs on the machine
(Figure 2)
1. Important! Read the operating instructions and
follow the warnings and safety instructions
2. Keep all other persons away from the danger
zone.
3. Caution! The cutter blades continue to run after
the motor is switched off. Wait for the blades to
come to a standstill.
Risk of injury!
4. Important! Always wear goggles when working
with the grass and shrub cutter.
5. Dispose of batteries correctly!
6. Protect the tool from the damp and never
expose it to rain.
2. Layout (Fig. 1)
1 Grass cutter blade
2 Wheels
3 Safety lock-off
4 ON button
19.09.2008 8:45 Uhr Seite 7

3. Proper use

The equipment is designed for cutting the edges of
lawns and small areas of grass in private and hobby
gardens.
Tools for private and hobby gardens are not suitable
for use in public facilities, parks and sport centers,
along roadways, on farms or in the forestry sector.
For the tool to be used properly it is imperative to
follow the instructions set out in the manufacturerʼs
directions for use.
Important! It is prohibited to use the tool to chop
material for composting because of the potential
danger to persons and property.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Cutting width :
Running time max.:
Speed n :
0
Battery pack:
Charging time:
Protection class:
L sound pressure level:
pA
L sound power level:
WA
Vibration a :
hV
Battery charger
Mains voltage
Output
Rated voltage
Rated current:
Sound and vibration were measured in accordance
with IEC 60335-2-94.
GB
85 mm
60 min
1150 rpm
Ni-Cd / 7.2 V d. c. / 1.2 Ah
4-6 h
III
68.5 dB
88.5 dB
≤ 2.5m/s 2
230 V ~ 50 Hz
12 V DC
300 mA
7