General Information - Olimpia splendid Bi2 B0658 Instrucciones De Montaje

1 GENERAL INFORMATION

1.1 GENERAL INFORMATION and WARNINGS
This manual is an integral part of the installation and use manual provided with
OLIMPIA SPLENDID series Bi2 terminals. Both manuals must be stored carefully
and ALWAYS stay with the appliance, even if it is sold to another owner or user, or
moved to another system. If it is damaged or lost, request another from your local
OLIMPIA SPLENDID Service Technician.
be suitably trained and of sound body and mind in compliance with the law. All the
installation operations described here must be carried out carefully and properly,
in compliance with current safety regulations.
For all other general information and warnings to be complied with during installation
and use of the B0658 kit, consult the instruction booklet provided with OLIMPIA
SPLENDID series Bi2 terminals.
1.2 COMPLIANCE
OLIMPIA SPLENDID Bi2 ventil radiators/fan coils equipped with the B0658
electronic kit comply with European Directives:
2 ASSEMBLY INSTRUCTIONS
2.1 OPENING THE SIDES
2.2 CONFIGURATION
the spare selectors provided.
Ensure that the appliance is not connected to the mains before carrying
out this operation.
2.3 INSTALLATION
- Slide the control panel into its seat at the top of the ventil radiator / fan coil and
position of the control panel must be against the side panel.
- To position the electronic control on the right-hand side of the appliance, see the
instructions given in the installation and use booklet provided with the Bi2 ventil
radiator / fan coil.
2.4 ELECTRICAL CONNECTIONS
Ensure that the appliance is not connected to the mains before carrying
out this operation.
- Fasten the earth cable to the appliance structure using the screw and washer
GB
2.5 CLOSING THE APPLIANCE
M1 Fan motor
Y1
S1 Intake grill safety microswitch
S2
3.1 POWERING ON
To manage the Bi2 fan coil / ventil radiator through the B0658 control panel, the
switch, it must be on.
3.2 OPERATING MODE
. When set to
NOTE: if an external contact S2 is connected to the appliance, the above
3.3 SHUTDOWN FOR PROLONGED PERIODS
If the appliance is to be switched off for a prolonged period, proceed as follows:
- Set the system master switch to OFF.
2
3 USE
and