Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
hoW to ChanGe the dIreCtIon
• Press and hold the down
will change to S.0
• Press the up ^ speed selector 2 times. The LED will change to S.2.
• Press the down
rotation set r.P or r.E
• Press the up ^ or down
and wait 4–5 seconds. The set pattern will be saved automatically.
error Codes
Error 1:
Short circuit.
Error 2:
4 Pin connector from the motor to the PC board wires may be loose
or broken.
Error 3:
The motor has activated the automatic protection circuit.
Error 4:
Data storage error or defective PC board.
Error 5:
Not Applicable
Error 6:
Indicates that the sensor plate positioning is wrong or the sensor is
defective.
speed selector for 2 seconds. The LED
v
speed selector again. The LED will change to the current
v
speed selector to change the current setting
v
7
Publicidad
Tabla de contenido
