Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Introduction
Thank you for purchasing a quality unit. Used carefully and in accordance with the instructions
set out below, your Solar Powered Rodent Stopper should give you many years of trouble free
use. Please read the instructions carefully to obtain the best results from your purchase.
Features
•
Scares rodents away by producing vibrations at 60 second intervals
•
For 500 m² areas
•
Mono-crystal solar panel
•
Cable-free
•
2 rechargeable batteries (AA 1,2V 600mAh Ni-Mh)
•
UV stabilized lens
•
Working life: 72 hours (if correctly position in an solar area in order that the solar panel can be
loaded)
•
Weather resistant
•
Height: 80 cm
Best Location for Rodent Stopper
1.
For the best result, locate the rat stop in a position where it can get direct sunlight
on the solar panel, and generally free from cover and shade. (As shown in figure 1).
2.
The solar panel must be left to charge for 2 sunny days before best results are
achieved.
Assembly Instructions
1.
Carefully remove the unit and all the fittings out of the box
2.
Assemble the mounting poles (2), and stakes (3); Push the stake directly into
the ground (DO NOT hammer the light or the stakes) (as shown in figure 2).
3.
Connect the cables
4.
Slot the controller head (1) on the upper part of the mounting poles carefully.
5.
Dig a hole of 15-20 cm deep and diameter of 40 mm to insert the rat stop.
8
Art. 0700
Solar Powered Rodent Stopper
fig. 1
1
2
3
Publicidad
Tabla de contenido
