Defrost; Stop Using; Troubleshooting - EAS ELECTRIC EMCF100 Manual De Instrucciones

4.2 Defrost

 Freezer shall be manually defrosted. Unplug the freezer and open the
freezer door, remove foods and drawers before defrosting; Open the
outflow holes and drainage holes (and place water container at the
outflow holes); indoor frost will naturally melt, wipe the defrost water with
a dry, soft cloth. When the frost softens, and ice scraper might be used to
the accelerate de-icing process.
 Please remove the food and put in a cool place when defrosting before
removing accessories.
 Other mechanical devices or other means shall not be used to accelerate
except those recommended by the manufacturer. Do not damage the
refrigerant circuit.

4.3 Stop using

Foods can be preserved for a couple of hours even in summer in case of power
failure; it is recommended to reduce the frequency of opening door and do not
put fresh foods into the freezer.
Please unplug the freezer left unused for a long time for cleaning. Keep the
door open to avoid the bad odor.
Do not turn upside, horizontally place or vibrate the refrigerator, the carrying
angle cannot be greater than 45º. Please hold the door and hinge when moving.
Continuous operation is recommended when the freezer is started. Please do
not move the freezer under normal circumstances so as not to affect the
freezer's service life.
5.

TROUBLESHOOTING

The following simple issues can be handled by the user. Please call the after-
sale service department if the issues are not settled.
INOPERATION
ODOR
Whether the freezer is plugged and connected to
power;
Low voltage;
Whether temperature control knob is in the work
area.
Failure power or tripping circuit.
Odorous foods should closely be wrapped;
Whether foods are rotten;
Whether the interior shall be cleaned.
19
V.1