Publicidad
Idiomas disponibles
Idiomas disponibles
10W / 20W LED Floodlight
installation accessories
Screw 2
Expansion screws 2
Install the card 1
The brown wire is connected with the L wire of city electricity.
The blue one is connected with the N wire of city electricity.
The green/yellow one is connected with the earth wire.
Recommend Power Cord type: H05RN-F 3 x 1.0mm2.
It is recommend that luminaires installed and fitted by a qualified electrican ensuring the installation complies to the current building
regulations. These products are designed for connection to a 100-240V~50/60Hz supply. Any broken or damaged parts should be
replaced as soon aspossible.
MELCHiONi S.p.a will not accept responsibility for any claims arising from a poor installation.
This product has no user serviceable parts. Clean with a damp cloth and dry with a lint free cloth or kitchen towel.
This Product is Class I and must be Earthed. Always switch off mains supply before fitting.
Replace any broken or damaged glass as soon as possible. Ensure all seals are intact and operational after fitting or maintenance.
Do not touch the lamp in use or just after use as there is a risk of being burnt. Do not cover it with paper or cloth.
Take off from flammable materials. Do not wash the lamp.
Do not use the lamp where the ambient temperature is over 45°C.
Keeping your eyes with a security distance, the light could cause damage.
Cod. 499047706 – color temperature 3200K – 50 LED
Cod. 499047707 – color temperature 6000K – 50 LED
Cod. 499047708 – color temperature 3200K – 100 LED
Cod. 499047709 – color temperature 6000K – 100 LED
Watt: 10W ( = 75W ) - Watt: 20W ( = 150W )
IP65
Direct Chassis (E)
Installation mark
Voltage: 100-240VAC - 50/60Hz
Dimensions: 120x130x36 mm (10W)
220x130x36 mm (20W)
Weight: 600 gr (10W) - 680 gr (20W)
Angle lighting: >105°
Brown (L)
Blue (N)
Model: iSpot LUNa
LED: 50 / 100
Dimmable: No
Live: Brown or Red
Earth: Green/Yellow
Neutral: Blue or Black
ENG
Publicidad
