Safety Instructions; Health And Safety; Environment - Altrad Belle PRO 600X Manual Del Operador

For your own personal protection and for the safety of those around you, please read and ensure you fully understand the following
safety information. It is the responsibility of the operator to ensure that he/she fully understands how to operate this equipment safely.
If you are unsure about the safe and correct use of the Pro 600X, consult your supervisor or Belle Group.
WARNING
• This equipment is heavy and must not be lifted single-handedly, either GET HELP or use suitable lifting equipment.
• Cordon off the work area and keep members of the public and unauthorized personnel at a safe distance.
• Personal Protective Equipment (PPE) must be worn by the operator when ever this equipment is being used (see Health & Safety).
• Make sure you know how to safely switch this machine OFF before you switch it ON in case you get into dif culty.
• Always switch OFF the engine before transporting, moving it around the site or servicing it.
• During use the engine becomes very hot, allow the engine to cool before touching it. Never leave the engine running and
unattended.
• Never remove or tamper with any guards tted, they are there for your protection. Always check guards for condition and
security, if any are damaged or missing, DO NOT USE THE PRO 600X until the guard has been replaced or repaired.
• Do not operate the machine when you are ill, feeling tired, or when under the in uence of alcohol or drugs.
Fuel Safety
WARNING
• Before refuelling, switch off the engine and allow it to cool.
• When refuelling, DO NOT smoke or allow naked ames in the area.
• Spilt fuel must be made safe immediately, by using sand. If fuel is spilt on your clothes, change them.
• Store gasoline in an approved, purpose made container away from heat and ignition sources.
Vibration.
Some vibration from the trowelling operation is transmitted through the handle to the operator's hands. DO NOT exceed the maximum
usage times.
PPE (Personal Protective Equipment).
Suitable PPE must be worn when using this equipment i.e. Safety Goggles, Gloves, Ear Defenders, Dust Mask and Steel Toe capped
footwear. Wear clothing suitable for the work you are doing. Tie back long hair and remove any jewellery which may catch in the
equipment's moving parts.
Electric Machines.
Electricity can kill! Always ensure that the machine is disconnected from the power supply before carrying out any maintenance/re-
pairs. Never use the machine in wet conditions.
Gasoline Machines.
Fuel.
Do not ingest fuel or inhale fuel vapours and avoid contact with your skin. Wash fuel splashes immediately.
If you get fuel in your eyes, irrigate with copious amounts of water and seek medical attention as soon as possible.
Exhaust Fumes
WARNING
Do not operate the Pro 600X indoors or in a con ned space, make sure the work area is adequately ventilated.
Safe Disposal.
Instructions for the protection of the environment.
The machine contains valuable materials. Take the discarded
apparatus and accessories to the relevant recycling facilities.
General Safety
Improper maintenance can be hazardous. Read and Understand this section before you perform any
maintenance, service or repairs.
Gasoline is ammable. It may cause injury and property damage. Shut down the engine, extinguish
all open ames and do not smoke while lling the fuel tank. Always wipe up any spilled fuel.

Health And Safety

The exhaust fumes produced by this equipment are highly toxic and can kill!

Environment

Component
Handle
Belt Guard
Bedplate
Hand Grips
Engine
Motor
Gearbox
Various Parts
14
Material
Steel
ABS
Steel
Rubber
Aluminium and Steel
Steel and Copper
Aluminium, Steel and
Phosphor Bronze
Steel and Aluminium