Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Anleitung_DF_850_SPK7:_
GB
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
1. Safety information
Please refer to the booklet included in delivery for the
safety instructions.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Layout (Fig. 1)
1
ON/OFF switch
2
Set screw for angle adjustment
3
Set screw for height adjustment
4
Setting wheel for cutting depth
5
Additional handle
6
Adapter for dust extraction system
7
Dust bag
8
Face spanner
9
Locking knob for changing the cutter
10 Base plate
11 Angle fence
12 Drive motor
2.1 Items supplied
DF 850
Case
Adapter for dust extraction system
Dust bag
Tape measure
Face spanner
10
07.10.2009
10:50 Uhr
Seite 10
3. Proper use
The biscuit jointer is designed for cutting slots for
biscuit joints in solid wood, plywood and
particleboard.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Mains voltage:
Power rating:
Idling speed:
Cutter dimensions:
ø 100 x ø 22 x 4 mm
Cutting depth:
Angle settings:
Protection class:
Weight:
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L
sound pressure level
pA
K
uncertainty
pA
L
sound power level
WA
K
uncertainty
WA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Vibration emission value a
≤ 2.5 m/s
h
K uncertainty = 1.5 m/s
2
230 V ~ 50 Hz
800 watts
11,500 rpm
max. 19 mm
0° - 90°
II /
3.2 kg
95 dB(A)
3 dB
107 dB(A)
3 dB
2
Publicidad
Tabla de contenido
