the right.
- Place the record to be played on the turntable.
- Select the correct playing speed for the record (33, 45 or 78
rpm) using the
- Speed control switch located neat the tone arm rest.
- Push the cue lever back to raise the tone arm.
- Moving the arm from its rest will start the turntable rotating.
- At the desired point on the record, pull the cue lever forward to
lower the arm.
- At the end of the record the Turntable will automatically stop
rotating.
NOTE: lowering the lid whilst the record is on the Turntable
will reduce the build up of dust, etc on the record which
would impair the performance of the unit.
Recording to Mac using Audacity
- Start the record playing as described above, and press Record
at the top of the Audacity window to start recording to the.
Note You may have to re-launch Audacity prior to starting the
recording.
- Once recorded use the Transport controls at the top of the
screen to, Go to start, Play, Record, Pause, Stop and Go to end of
Wave form as below:
Pg. 20