Setting Up Anynet; Switching Between Anynet + Devices - Samsung 6 Serie Manual De Usuario

Setting Up Anynet +

¦
Press the TOOLS button to display the Tools menu. You can also display Anynet + menu
T
by selecting Tools → Anynet + (HDMI-CEC).
❑
Setup
Anynet + (HDMI-CEC) → Off / On
■
To use the Anynet + Function, Anynet + (HDMI-CEC) must be set to On.
When the Anynet + (HDMI-CEC) function is disabled, all the Anynet+ related operations
N
are deactivated.
Auto Turn Off → No / Yes
■
Setting an Anynet + Device to turn Off automatically when the TV is turned Off.
The active source on the TV remote must be set to TV to use the Anynet + function.
N
N
If you set Auto Turn Off to Yes, connected external devices are also turned off when the
TV is turned off. If an external device is still recording, it may or may not turn off.
¦

Switching between Anynet + Devices

1. Press the TOOLS button. Press the ENTERE button to select Anynet + (HDMI-CEC).
2. Press the ▲ or ▼ button to select Device List, then press the ENTERE button.
Anynet + devices connected to the TV are listed.
N
N
If you cannot find a device you want, press the red button to scan for devices.
. Press the ▲ or ▼ button to select a particular device and press the ENTERE button. It
is switched to the selected device.
Only when you set Anynet + (HDMI-CEC) to On in the Application menu, the Device
N
List menu appears.
N
Switching to the selected devices may take up to 2 minutes. You cannot cancel the
operation during the switching operation.
N
The time required to scan for devices is determined by the number of connected devices.
N
When the device scan is complete, the number of devices found are not displayed.
N
Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to
the TV may not always be automatically displayed in the device list. Press the red button to search for the connected device.
If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet + function. Make sure to
N
switch to an Anynet + device by using the Device List.
Anynet + Menu
The Anynet + menu changes depending on the type and status of the Anynet + devices connected to the TV.
Anynet + Menu
View TV
Device List
(device_name) MENU
(device_name) INFO
Recording: (*recorder)
Stop Recording: (*recorder)
Receiver
N
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
Description
Anynet + mode changes to TV broadcast mode.
Shows the Anynet + device list.
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu
of the DVD recorder will appear.
Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Stops recording.
Sound is played through the receiver.
English - 6
Media Play (USB)
Anynet + (HDMI-CEC)
InfoLink
Setup
Anynet + (HDMI-CEC)
: On ▶
Auto Turn Off : Yes
U Move E Enter R Return
Setup
Anynet + (HDMI-CEC)
: On
Auto Turn Off : Yes ▶
U Move E Enter R Return
View TV
Device List
Recording: DVDR
DVDR MENU
DVDR INFO
Receiver: Off
Setup
U Move E Enter R Return