ENG
Main parts of mixer:
1. Label
2. Stirring shaft
3. Stainless steel bowl
4. Base
5. Connecting Knob
6. Speed control switch
7. on/off knob
8. Power cord
Operation:
1.
The standard value of operating alternating current which the
mixer uses is 240 volt 50Hz. (please use electric outlet with 3 wide contacts and
good grounding)
2.
Installation of stirrer: loosen connecting knob 5 of head; raise
head and fix it. Place stirrer on stirring shaft and turn it 45° counter clockwise.
3.
Installation of stainless bowl. Place stainless bowl on bowl seat
and turn bowl to fix it.
4.
Procedure of starting mixer: After materials are filled in; lower
the head and tighten connection knob 5, turn speed control switch to lowest
speed, turn power switch 7 on and then set required speed gradually after stirrer
is in normal operation.
5.
When operation is completed, turn speed control switch to the
lowest speed firstly, then turn power switch off and unplug.
4
SINMAG EUROPE BVBA
Accessories and functions:
1. Wire stirrer: Used for stirring liquid ingredients, such as cream and eggs.
2. Flat stirre; used for stirring batters, powder, and shredded ingredients; such as
filling.
3. Hook Stirrer : Used for stirring more sticky ingredients, such as dough.
Notes:
1. Electric outlet must be provided with a good ground wire to assure mixer's good
grounding through it. There will be electrical shock if no ground wire or an
improper grounding mounted. The ground wire can never be connected with
gas pipe, Lightning rod or telephone line. Electric leakage should be checked
after the mixer installation.
2. Don't place your hand into the stirring bowl during the operation. Make sure the
mixer is unplugged before the installation.
3. Don't operate the mixer beyond the limited time to avoid reducing its service life.
4. The mixer should be mounted on a stable and clean place. Keep it away from
overheated or overwet places and away from equipment which has strong
electromagnetic power or can produce strong electromagnetic power.
5. Keep mixer clean constantly. Unplug it before maintenance. Clean it with a piece
of soft and moistened cloth. Don't clean it with liquid or spraying detergent.
SINMAG EUROPE BVBA
ENG
5