Domestic Hot Water Production; Domestic Hot Water Temperature Adjustment; Domestic Hot Water Hardness; Insulation For Domestic Hot Water Pipes - Palazzetti TERMOPALEX HWT Serie Manual De Uso Y Mantenimiento

6 DOMESTIC HOT WATER
PRODUCTION
We use the term "domestic hot water" (DHW)
to indicate the hot water used for cleaning and
personal hygiene in buildings and homes, which
differs from the hot water used to power the
heating system.
We recommend evaluating the possibility of gen-
erating hot water by integrating other domestic
hot water production systems.
6.1 Domestic hot water temperature
adjustment
The temperature of the domestic hot water used
can be adjusted by setting the wheel on the valve
(Fig. 6.1).
The thermostatic valve ensures a high flow rate
and good functional performance, as well as
an anti-scald function for general domestic hot
water applications. The anti-scald function mixes
hot water generated by the heat exchanger with
cold water in order to ensure a constant temper-
ature on delivery.

6.2 Domestic hot water hardness

To help prevent the formation of scale, which
could prevent correct heat exchange in the heat
exchanger plates, and to always ensure the high
efficiency and durability of the product, the use
of a water softening system is recommended.
6.3 Insulation for domestic hot water
pipes
Insulating the pipes in the heating system is
particularly important to reduce the loss of heat
from the distribution subsystem.

6.4 Thermostatic mixer

The thermostatic mixer offers temperature ad-
justments in 6 positions to increase temperature
from an initial value of 35 °C up to a maximum of
60 °C (Fig. 6.4).
• Remove the cap (Fig. 6.4).
• Adjust the temperature (Fig. 6.4).
• Close the cap.
42
Technical data
Pressure class PN10
Max. differential Mixing: 0.3 MPa
pressure
95 °C
Max. fluid
temperature
Connection Male thread (G): ISO 228/1
Compliance PED 2014/68/EU, article 4.3
Operating 1.0 MPa
pressure
Temperature ± 2 °C
stability
Temperature 35-60 °C
range
Adjustment scale no. 6 positions - increments of
settings
± 4 °C
Valve housing and other metal
parts in contact with the fluid:
Material
Dezincification resistant brass,
DZR
004778240 - 15/04/2020
Fig. 6.1
Fig. 6.4