Publicidad
Idiomas disponibles
Idiomas disponibles
between the two units.
If you are unable to establish an automatic connection between the two units,
you can follow the manual procedure below:
1. Hold down the button
2. Press the TX button on the outdoor sensor to transmit a radio signal to
the indoor unit.
Changing the communication channel
3 radio communication channels are available between the two units. Channel
1 is predefined.
Open the battery compartment.
»
Change the channel selector to one of the 3 positions.
»
Hold down the button
»
sensor screen.
Press the TX button on the outdoor sensor to transmit a radio signal to
»
the indoor unit.
The indoor unit will automatically display the new communication channel.
However, if this does not happen, you can manually change the communication
channel number. Press the button repeatedly
channels:
,
Time setting
1. Hold down the button
flash on the screen.
2. Press the button
3. Press again the button
the screen.
4. Press the button
5. Press again the button
screen.
6. Press the button
7. Press the button
7
until the icon
until the symbol
,
or
(displays the 3 channels in the loop)
for about 3 seconds. The time indicator will
or
to reach the desired value.
to confirm. The minute indicator will flash on
or
to reach the desired value.
to confirm. The icon
or
to choose between 12 or 24 hour format.
to confirm. The icon
starts to blink.
flashes on the outdoor
to switch between the 3
will flash on the
will flash on the screen (it
User manual
Publicidad
