Velleman WT6810 Manual Del Usuario página 3

5. Overview
6. Setting/operation
• The main display shows the time (C), the day of the week (D), the date (E & F) and
the temperature.
Clock
• From the main display, press the mode key (I) once to enter time and date setting.
• Use the up (L) or down (M) keys to enter the value and press the set key (K) to save
and go to the next entry. The order of settings is:
12/24h format – hour – minutes – year – month – day
Alarm
• From the main display, press the mode key (I) twice or press the alarm key (J)
followed by the set key (K) to enter alarm setting.
• Use the up (L) or down (M) keys to enter the value and press the set key (K) to save
and go to the next entry. There are 9 tunes to choose from. The order of settings is:
Hour – minutes – tune
• After setting the alarm, press the mode key (I) 3 times to return to the clock and date
display. When the alarm time is set and the alarm is enabled, a small bell is displayed
next to the current time.
• Once an alarm is set, the only way to disable it is to remove and replace the batteries.
• The alarm will sound for one minute at the set time. Press any key to stop manually.
• To activate the SNOOZE function, go to the normal time and date display mode and
press the up (L) key. Note that the alarm must be enabled before the SNOOZE
function can be activated. When activated, an indication is shown next to the current
time.
00 (10/09/2008)
Front
A. Picture area
B. 12/24 time indication
C. time
D. day of week
E. month
F. day
G. temperature
H. °C/°F indication
Back – control panel
I. mode
J. alarm
K. set
L. up
M. down
3