Safety Checks; Technical Data - Belle Group MAXIPAVE Manual Del Operador

Before starting each day, in addition to the 10 minute daily routine maintenance, check the following items to ensure trouble free
performance
Improper maintenance can be hazardous. Read and understand SAFETY PRECAUTIONS AND
CAUTION
GUIDELINES before you perform any maintenance, service or repairs.
1. Only operate with knives in good condition.
2. Inspect the entire unit for loose bolts/nuts, damaged or missing parts and repair or replace them as needed.
3. Ensure that the handle is fully upright after cutting and before loading next item.
4. Eye protection should be worn.
5. Never leave the machine with handle raised - leave in lower or locked position.
6. Be observant of people and obstructions within the work area.
ALWAYS use genuine replacement parts supplied by Belle Group.
B
Model
A - Length (mm)
B - Width (mm)
C - Height (mm)
Maximum Cutting Length (mm)
Maximum Block Depth (mm)
Weight (Kg)
Cutting Force (kN)

Safety Checks

Technical Data

10
A
Maxipave
46.1
12.4
23.0
15.7
4.9
77.2
45.6