Cleaning, Care & Maintenance; Troubleshooting; Technical Specifications - Olympia CM266 Manual De Instrucciones

Cleaning, Care & Maintenance
WARNING: Always turn off and disconnect the appliance from the power supply
before cleaning. Always allow the appliance to cool before emptying or cleaning.
• Wipe down the exterior of the appliance with a damp cloth.
• Some cleaning agents may cause damage when used for a prolonged period on stainless steel. Use a
suitable stainless steel cleaner.
• Dry the exterior thoroughly.
• Wash all removable parts in warm, soapy water.

Troubleshooting

If your Olympia appliance develops a fault, please check the following table before making a call to the
Helpline.
Fault
The unit is not The unit is not switched on
working
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Thermal cut-out switch has
activated
The thermostat has not been set
correctly
The heating element has failed

Technical Specifications

Model Voltage
CM266
230V 50Hz
CM266_ML_A5_v3_20190701.indb 5
Probable Cause
Check the unit is plugged in correctly and
switched on
Call Olympia agent or qualified technician
Replace the plug fuse
Check power supply
Call Olympia agent or qualified technician
Reset Thermal cut-out switch (Page 4)
Set the thermostat to a higher temperature
Call Olympia agent or qualified technician
Power Current
900W 3.8A
Solution
Dimensions
Weight
H x W x D mm
362 x 638 x 347 7kg
UK
5
2019/7/1 15:50